Back to shop
Atomic Pi User Forum
eMMC and root filesystem benchmarks
Hi all, here's a set of bonnie++ benchmark results with old (as shipped: nojournal, delalloc) and...
No Hdmi Audio in Windows or Ubuntu.
I've tried windows 10 (1809) installed on the emmc, no audio output device is installed. In devic...
Synaptic Package Manager
I ran Synaptic package manager and it asked for root password to continue. Entered the new passwo...
BNO055 in windows for python?
Hello, how do you install the BNO055 sensor module in windows for python? A greeting
Video : Install Windows10 to external USB device/SSD + Install drivers
Hi all. I've made a new video where I show how to install official Windows 10 to an external U...
Hyperion Ambilight output to GPIO
Hi all, Sorry for my newbie question. I recently got an atomic pi and would love to install hype...
AtomicPi is slower than Odroid
The main selling point of Intel-based SBCs is higher performance at the cost of slightly higher p...
So far what has everyone done with their atomic pi?
So far I have the 3d printed case that someone wonderful has posted on here which I drilled holes...
GPIO Support Windows 10
Is there anyway to use GPIO with Windows 10? Will Hi-Safe from AAEON work on Atomic PI board?
Got a "Sour" Pi...
Just received my APi, and have some strange issues... FYI, I am powering it up with a regulated ...
After a powercord trip mishap my atomic pi fell and the eMMC stopped being recognized. The BIO...
Analog Audio Input?
I would like to use my Atomic Pi as an Icecast streaming client, but can seem to find how to send...
How to contact the developers
Does anyone know how to contact the developers of the Atomic Pi? Do they monitor this forum? I ha...
Linux installs 100% working?
Is there an Linux install that's 100% working at boot? With audio, bluetooth, wifi, etc etc...
Has anyone else noticed their WiFi connection being sluggish/flaky? Joel
Here are some of my feature request for next releases or future updates BIOS: - option to dis...
Using GPIO for ir receiver and sysfs. Helpless noob.
Connecting the 'data' pin of a TSOP38238 to pin 24 of the atomic's connector, then 'echo 335 /sys...
New Baby Breakout: LEDs and Jumper
I am a new Atomic Pi user, picking up a board for small server/cluster work and looking for a x86...
BIOS not retaining settings
I've got an issue where changes to BIOS settings are not saved. No power interruption occurs, si...
USB in peripheral mode
Hello, we are trying to do some evaluation before purchasing the sample. Can someone advise if on...
How to power the large breakout board
I am a softie, looking to start with hardware and got the Pi to start out with. First stumblin...
System Not Booting to HDMI Monitor
I just plugged in my atomic pi with the baby breakout board and 5V 4A power supply and nothing sh...
Anyone made or found a case? I've got mine running prime os and need to have it a bit more protec...
HDMI works good on Ubuntu 18.10. Can I insert the Ubuntu 18.10 Audio module into Mint 19?
I have installed Ubuntu 18.10 five times and it has worked perfectly without fiddling. HDMI audio...
Set up Xmos sound output
Hello, With the lubuntu "official" image, I have the Xmos output fully working (using 5V for t...
No longer booting from USB
Yesterday I was able to boot (a non-Windows/non-Linux OS) from a USB stick. No problem. I then tr...
hi evryone. i looking someware the atomic pi have news bios MF-001 R1.2 (MFC1AM12) and i have th...
Best OS my opinion
I have tried quite a few os/s on the AP and honestly the best preforming is Peppermint. Low memo...
error: no suitable video mode found.
Hey, I just received my APi but sadly it is not spitting out an HDMI signal. Serial says: `...
I'm trying to get my atomic pi to pxe boot. I'm not seeing the dhcp request on the server. But...
Impossible to start OS with emmc
Hello, I am currently doing tests with with Atomic Pi to make an emulation "box". Recalbox run...
Pinout to Add USB 2.0 connector in Camera port
Hi All I have one of these wonderful little devices, however, I would like to hook up an extra...
howto connect FAN
hi, my pi seems to turn off at 58-60 deg C. I see the fan label on the board but dont want to so...
gpio on windows
ho do i use the gpio on windows?
Lubuntu 19.04 lxqt in atomicpi not shutdown or reboot.
Hi, i have set up newest lubuntu lxqt 19.04 on my atomicpi, when i try to reboot it o poweroff st...
Im trying to run MAME and my USB encoders are not being recognized. I downloaded a joystick app a...
Help, not powering up
Hello, I've used a few RPI's, but this is my first Atomic Pi, that being said, this thing will ...
Connector Locations and Pinouts
I've created a PDF document showing the locations of all the connectors with pinout details for m...
Mouse and Keyboard not working if a bootable, non-UEFI (mbr) USB stick is in the same USB hub
Following issue occurs with a USB 3 hub (UGreen, Model 20291): I realized that my mouse and keyb...
hi evryone i wana know if i can use 12v 3.8a for all powered the board and wherre i need connece...
Power supply and performance
Hello, Is there any relation between power supply features and system performances ? I curren...