24V Midspan PoE
Regulated Smart Midspan PoE Injector with Auto-RebootEliminate POE problems. Restart WiFi APs and links automatically. Improve customer service and satisfaction. This regulated 8-port 24 volt POE midspan injector is built specifically for Ubiquiti, Alfa, Tranzeo, Microtik, EnGenius and similar radios and IP cams that require clean, well regulated 24V POE on a 10/100 interface.
AutoPing Reboot with Tough PoE™
The injector will automatically sense when an IP device goes down and reboot by power cycling. Scripting, syslog, Auto-Pingautomatic reboot, and WOL support are standard features in every injector. Utilities like our new email alerter are free.
Ideal for WISPs
Simplify installations. Reduce cabling and clean up your installations. Eliminate the bulky UPS, separate POE injectors and power switchgear. One compact unit controls and reboots your radios securely from any web browser. Removable rack/wall mount brackets are included.
Eliminate the UPSDirectly connect a pair of 12V batteries for uninterrupted power without a separate UPS. The injector senses both battery and AC power, switching instantly to the best power source. The built-in smart charger will float and trickle charge anything from small gel-cells to a pair of car batteries. For quick recharge, fast chargers can be added externally. An updated design with dual voltage regulators ensures that sensitive radios like UBNT receive precisely regulated and protected power.
Remote Power Control, Voltage Montoring, Reboot, and New! Reset-to-Defaults
Monitor battery and PoE voltages remotely via the web. Remotely reset radios that support reset-to-defaults over Ethernet. Remotely sense AC power status. The injector will run on AC, DC, or both. Solar and wind systems are easy to connect. The injector is ideal for remote radio sites running only on DC power.
150W Power, Fast Surge Suppression
Power surges, static, and nearby lightning can damage radios. 18 separate surge suppressors including Gas-tube, SIDAC, and self-resetting fuse protectors provide clean, safe PoE to keep your equipment running rock-solid. The injector combines a passive 150W power injector -plus- an smart active current monitor that detects and corrects overloads. Get reliable operation through power surges and brown-outs, even on 802.3af POE+ equipment that may not negotiate reliably on other injectors and switches. Since even a small surge or over-voltage can destroy 24V devices, the injector provides regulated 24.0VDC at the ports, protecting outdoor devices on longer cable runs.
Saves Time & Money - Just $295!
Get the injector, power switch, automatic reboot and UPS all in one box for 1/3 the cost of the individual parts. There's safety in numbers: DLI has now built over 200,000 of the world's best selling power switches and POE injectors. Try yours risk-free for 15 days. Call (408) 330-5599 now for quantity discounts, fast shipping, and international orders.
Like to learn more?
"We installed 3 of our POE injector switches last week at POPs and on another electrical phase at our NOC where the first unit went down. Since installing the 3 units, the IP alerts I used to get from our network monitoring system have dropped to zero. During their few days in service, we have had 3 tropical rain and lightning storms and so far, not a blip. Installing your POE injector allowed us to remove 18 power cables used for brick POEs and this alone, has reduced disruption from techs accidentally knocking power cables on flimsy power strips. Operationally, our network appears to have gone silent...no more blips or false and sporadic alerts. And, traffic flows have been consistently higher than before because there have been no intermittent hiccups..." -Seni Williams
"We were constantly replacing power bricks until we found this. Keep up the good work." - Paul Tyson
"...don't need to drive out and reboot the nanostations any more..." - Mark Inness
"The remote AC power sensing is a godsend." - Steve Roper
Have a Look at Other Solutions...Need something else? DLI builds redundant rack-mounted PDUs, High power DC switches, DIN relays, and a really cool open source PLC.