Back to shop
Atomic Pi User Forum
Sort: Newest topic
Most recent activity
eMMC and root filesystem benchmarks
Hi all, here's a set of bonnie++ benchmark results with old (as shipped: nojournal, delalloc) and...
Enchilada board Power LED no longer comes on
I was moving my atomic pi assembly and the power LED went off in the process. This is the second...
My APi does not boot without USB after I checked properties during upgrade
When upgrading to 22.04 from 20.04 I wanted to check how much disk space it was using by way of t...
Hello All, I know there are a bunch of images available but which one is the true default image s...
Is there anyone who's using Pi's to mine? I have a 3 stack rig built with all running Ubuntu but...
How To Clean Sticky Buttons In Car 2?
There are a few ways to clean sticky buttons in a car. One way is to use a cotton swab or toothpi...
GPIOs for LED with latest kernel 5.19.0-rc3+
Was trying to load latest kernel on atomic pi where the gpiochip* base has been changed wrt to wh...
Linux Kernel .config file
I have searched high and low without success... Is there a linux kernel .config file which is op...
How To Send Mp3 File On Instagram Dm?
How To Send Mp3 File On Instagram Dm? want to know as well? https://www.techy10.com/how-to-send-m...
Diagnose not starting up
I've had an Atomic Pi with the Baby Breakout board for about 2 years, and have been using it with...
How to boot to the linux gui desktop
I haven't touched my APi in a while but wanted to set it up as a remote desktop. When I power it ...
rom write protection
Hello, I would like to have more information about Atomic PI. It has write protection for onboa...
Gpio keyboard input
Hello I'm interested in using keyboard stroke input from buttons wired into the GPIO, like with ...
Working on ISCSI Boot . So far no luck. Please share if someone has successfully accomplished this through ipxe sanboot.
I've gone to a point where it boots from iscsi mounted drive and after like 10-20 seconds of load...
Mayfield audio under Lubuntu Focal 20.04 LTS
Hi folks, I've had my pi for a year or so and decided it was time to have a go with the Mayfield ...
Missing pages in Schematic
I'm looking through the schematic linked from https://www.digital-loggers.com/api_faqs.html as "C...
Cannot set Static IP address
I did get my root password set. Thanks to the group. I have been trying to set a static IP4 addre...
Atten: DLI, Potential AI Developer's Kit Images
With great difficulty I have succeeded in getting OpenVINO and the Coral TPU support running on t...
How do I load Ubuntu 20.04 OS to eMMC?
Just received 3 API's. After using one for about a week and getting it configured the way I like,...
Where can we download the AI developers kit image?
I've got the Atomic Pi development kit from Amazon with the large breakout board. I also have an...
Legacy USB support?
I love playing with my Atomic PI ... today I installed Kolibri OS (super fast OS written in assem...
Pi Breakout Board Power problem?
I've been having issues ever since attaching the Atomic Pi Breakout board. My Pi will periodical...
Out of space for upgrade?
Hello folks, A couple of weeks ago my api, which is running the original Ubuntu with all updates ...
Hi guys, just got my atomic yesterday (with some damage, CN5 was pretty smashed) so i powered it ...
3 Questions .... probably not exclusively api but for my pi
I have recently obtained my api and have it up and running with debian, and the tweaked kernel pu...
Atomic Pi camera instructions for install on OS images?
Hi, I just got a kit from DLI off of Amazon. I installed the latest 'Focal' OS and found the kern...
How to repair EMMC? won't boot after apt-get upgrade
I wanted to use my AtomicPi (Ubuntu) as a file server with a 12Tb drive I recently bought. Before...
Ubuntu 20.04 LTS "focal" image from DLI works well on the APi
Really Good Support and Good JOB from Digital Loggers The "focal" system image file (atomicpi-ub...
Installation of FuryBSD on Atomic Pi
I have written a 10 page pdf on installing FuryBSD. How do I attach it?
Don't hit that reset button!!
I was moving my Atomic Pi around the other day, and I accidentally hit the BIOS/RTC reset button!...
Raspbian on eMMC
Just thought I’d share how I installed Raspbian on the onboard eMMC. I got the x86 Raspbian image...
Small Questions: Raspberry Pi vs Atomic Pi
Hi everyone! I have a stumbled across this by chance, but I have a few questions and am hoping s...
CPU boost speeds?
Hi all, Is there any relation to CPU boost speeds on the Pi, and CPU temperatures? Do the tempera...
APi sleep mode?
I am wondering if it is possible to enable a sleep/hibernation mode on the Atomic Pi, and if so c...
can not enter BIOS
Weird thing. The kb + mouse seems to work fine, I press DEL or TAB and I enter the AMI bios, whic...
Camera module not recognized
I am using the default bionic image with Pi version 188.8.131.52. I get to use my webcamera once. Ch...
Using GPIO as a PPS input
Hey All, I'm interested in using my AtomicPi as a GPS-disciplined time server. I have a few GPS r...
Installed Ubuntu Studio 19.10
I installed Ubuntu Studio 19.10. Everything works right out of the box, HDMI video & audio, W...
Broken Image? Ubuntu Bionic LXDE Stand Alone v184.108.40.206 (Bionic 18.04.1 LTS) LXDE
Has anyone successfully booted the full Ubuntu 18.04 LTS image after using the Readme instruction...
No xmos sound output
Hello, AtomicPi installed Windows 10x64. All driveres are installed (XMOS also). Sound device (x...
XMOS Line Out
Hi, I wanted to know if there's any way to have a line out from the XMOS device and how. I know y...