Back to shop
Atomic Pi User Forum
Sort: Oldest topic
Most recent activity
eMMC and root filesystem benchmarks
Hi all, here's a set of bonnie++ benchmark results with old (as shipped: nojournal, delalloc) and...
Welcome to the user's forum!
Post any questions, comments or information for others here. You must be logged in to post.
This is on my todo list. I have the breakout board and would like to wire up a switch on a GPIO ...
atomicpi and gpio python libraries
I've got a fresh install of lubuntu running from an SD card on my API and would like to get all o...
Has anyone else noticed their WiFi connection being sluggish/flaky? Joel
Got a "Sour" Pi...
Just received my APi, and have some strange issues... FYI, I am powering it up with a regulated +...
Looking for Power Supply Options
So I'm looking at some potential power supplies, and I'm trying to find something for the screw t...
Greetings, The enchilada has some speaker connections, and 12V input for an onboard amplifier. ...
Breakout board with micro USB provided power
Sorry for the newbie-sounding question, but does anyone know of a breakout board that would allow...
Available: Cross compiling Clang toolchain
Hi folks, In case you want to cross compile with Clang, I have a handy CMake project here that b...
HDMI Audio not working on Lubuntu reinstall
I can't get HDMI audio to work and have a fresh install of Lubuntu. pacmd list-sources shows: ...
I would like to get at least 1 more (pref 2 more) and a set of the breakout boards (one for unit ...
Looking for at least a partial BOM for the main board
So I want to check Digikey, Alibaba, etc for the correct Connectors for all the boards JST & ...
USB Instability with multiple devices on a non-powered hub?
So far so good with the AtomicPi with OpenCV up and running and working well. However, I noticed ...
Increase I2S Audio output from 48Khz to 192Khz
How do I change the clock to increase the I2S audio output from 48Khz to 192Khz for the XMOS chip...
BIOS not retaining settings
I've got an issue where changes to BIOS settings are not saved. No power interruption occurs, si...
No response upon applying power for first time
I have received my Atomic Pi, but upon connecting 1. Display via HDMI cable 2. a Keyboard via US...
Display problem on TV
My atomic pi has been working fine on a monitor I've been using with a HDMI to DVI converter cabl...
Is a copy of the LUbuntu operating system available yet? The Pi will not run in desktop mode and...
Root password is absolutely required
I have seen a few places that claim there is no password for Root. However, to change the time, ...
PulseAudio Not Working
The sound icon is greyed out and when selecting sound settings, PulseAudio fails to establish a c...
Running the Sample Files
Has anyone tried running the sample files that are located on the Desktop? I have been trying to ...
Image Download slowness
It seems that the Download server for the Atomic Pi images is having a hard time keeping up with ...
Any chance of creating packages for the hardware? Like ones to add to standard Ubuntu install? Qu...
Root is locked in read only
APi disk is locked in read only mode. Nothing I've done has helped including creating a root pas...
Display port breakout?
Looking through the specs on the Atomic Pi there seems to be a limit to the resolution of the HDM...
I'm thinking of adding this to four Raspberry Pis that I already have. Can Atomic Pi run headle...
The Atomic Pi promotion says of the Intel processor: "Eats RPi for dessert. Beats some desktops....
No sound. Slow boot. No youtube. WiFi weak. Chromium and Firefox eventually crash
I also have the sound problem. While trying to solve it, I also encounter various other error mes...
APi hardware (and software) beginners guide
Yes I am a bit of a newbie. After I got the APi, there wasn't any power supply so I didn't start...
Newer OS ver18.104.22.168 image ?
Can you post the newer OS ver22.214.171.124 on the download page. Thanks
Passwords not working
Good day I just got four Atomic Pis and have set them up on a rack. I would like to ask if anyon...
can I use elenco 22 gauge wire for power in place of 26 gauge????
just got my atomic pi. as I read it I need TWO wires for each polarity so two wires for positive ...
Hello from germany, nice hardware is on my desk. I have few problems with power supply, but i fi...
Hello I need some help I try to install Windows 10 for some days I just can not get it from a USB...
Stability issues in default Ubuntu 18.04 image with video playback in VLC
After fighting with this for a while, I felt it fair to post something about this here. When I g...
How to get boot options for SDcard or USB drive to show up in BIOS
Here is another quick tip to help people who haven't dealt much with UEFI BIOS and the quirks of ...
How can I choose the audio output device in X windows?
Once you open up an application, such as VLC or MPV or maybe even Chromium and you want to choos...
No sound, can't upgrade to 18.10
I'm also getting the "connection to PulseAudio failed" error and I've tried editing the default.p...
install Windows 10 on micro SD
I have two Atomic Pi boards, one of them has been installed windows 10 successfully on the on-boa...
Is there a possibility of a dual NIC version being released? I think Atomic Pi would make a perfe...