Back to shop
Atomic Pi User Forum
Sort: Least viewed
Most recent activity
eMMC and root filesystem benchmarks
Hi all, here's a set of bonnie++ benchmark results with old (as shipped: nojournal, delalloc) and...
No sound, can't upgrade to 18.10
I'm also getting the "connection to PulseAudio failed" error and I've tried editing the default.p...
The Atomic Pi promotion says of the Intel processor: "Eats RPi for dessert. Beats some desktops....
Working on ISCSI Boot . So far no luck. Please share if someone has successfully accomplished this through ipxe sanboot.
I've gone to a point where it boots from iscsi mounted drive and after like 10-20 seconds of load...
Help Sata / GPIO / Ram
Hello. I am looking for information about the possibility of installing one or more hard drives i...
No xmos sound output
Hello, AtomicPi installed Windows 10x64. All driveres are installed (XMOS also). Sound device (x...
Display port breakout?
Looking through the specs on the Atomic Pi there seems to be a limit to the resolution of the HDM...
Stability issues in default Ubuntu 18.04 image with video playback in VLC
After fighting with this for a while, I felt it fair to post something about this here. When I g...
Keyboard-configuration errors upon initial startup
I just received my Atomic Pi Developers Kit and I connected up the Atomic Pi standalone with the ...
OS instalation woes
Hello all, I had the seemingly common issue with HDMI audio when I powered on my Atomic pi for t...
Raspbian on eMMC
Just thought I’d share how I installed Raspbian on the onboard eMMC. I got the x86 Raspbian image...
How can I choose the audio output device in X windows?
Once you open up an application, such as VLC or MPV or maybe even Chromium and you want to choos...
USB 3 not working
I have been getting into a number of things with the Atomic Pi but have never been able to get th...
error: no suitable video mode found.
Hey, I just received my APi but sadly it is not spitting out an HDMI signal. Serial says: ``` V...
I'm compiling linux for this device but having trouble booting it. Everything I've come across so...
Hello I need some help I try to install Windows 10 for some days I just can not get it from a USB...
hi evryone i wana know if i can use 12v 3.8a for all powered the board and wherre i need conneced...
USP heder-can you make a head connedtor with a USB port on it for a secod USP
I see that the breakout board has a cable that seems to link directly to the header next to the U...
Breakout board with micro USB provided power
Sorry for the newbie-sounding question, but does anyone know of a breakout board that would allow...
No response upon applying power for first time
I have received my Atomic Pi, but upon connecting 1. Display via HDMI cable 2. a Keyboard via US...
can I use elenco 22 gauge wire for power in place of 26 gauge????
just got my atomic pi. as I read it I need TWO wires for each polarity so two wires for positive ...
APi hardware (and software) beginners guide
Yes I am a bit of a newbie. After I got the APi, there wasn't any power supply so I didn't start...
How to repair EMMC? won't boot after apt-get upgrade
I wanted to use my AtomicPi (Ubuntu) as a file server with a 12Tb drive I recently bought. Before...
Do I have a defective board?
Hi all, Bought the Atomic Pi board as on a paper it looked extremely promising... Actually, wante...
Anyone made or found a case? I've got mine running prime os and need to have it a bit more protec...
Newer OS ver188.8.131.52 image ?
Can you post the newer OS ver184.108.40.206 on the download page. Thanks
Camera module not recognized
I am using the default bionic image with Pi version 220.127.116.11. I get to use my webcamera once. Ch...
howto connect FAN
hi, my pi seems to turn off at 58-60 deg C. I see the fan label on the board but dont want to sol...
Using GPIO for ir receiver and sysfs. Helpless noob.
Connecting the 'data' pin of a TSOP38238 to pin 24 of the atomic's connector, then 'echo 335 /sys...
This is on my todo list. I have the breakout board and would like to wire up a switch on a GPIO ...
Broken Image? Ubuntu Bionic LXDE Stand Alone v18.104.22.168 (Bionic 18.04.1 LTS) LXDE
Has anyone successfully booted the full Ubuntu 18.04 LTS image after using the Readme instruction...
faulty Ethernet chip?
I bought my board from an amazon seller and I camt get it to boot, I get the booting screen, the ...
How do I load Ubuntu 20.04 OS to eMMC?
Just received 3 API's. After using one for about a week and getting it configured the way I like,...
After a powercord trip mishap my atomic pi fell and the eMMC stopped being recognized. The BIOS ...
Don't hit that reset button!!
I was moving my Atomic Pi around the other day, and I accidentally hit the BIOS/RTC reset button!...
New Baby Breakout: LEDs and Jumper
I am a new Atomic Pi user, picking up a board for small server/cluster work and looking for a x86...
Increase I2S Audio output from 48Khz to 192Khz
How do I change the clock to increase the I2S audio output from 48Khz to 192Khz for the XMOS chip...
help start atomic
hello today I received my atomic pi. these tried to start the system gives me the user screen and...
Hyperion Ambilight output to GPIO
Hi all, Sorry for my newbie question. I recently got an atomic pi and would love to install hyper...
Strange issue with baby breakout board
Hello! I've ordered 4 boards now, these things are fantastic! However, I'm seeing one strange is...
Developer Kit Camera - Issues
Hey all, So i recently purchased the full kit with 2 api, mini breakout, enchilada breakout, 2 c...